6 Things You Should Know About Dental Braces

Things You Should Know About Dental Braces1) Traditional Braces

The traditional metal wired braces are made up of stainless steel and at times can be used in combination with the metal called titanium. The traditional metal braces are among the common kinds of braces, which have metal bracket along with elastic ties holding the wire over the metal brackets. The second common kind of braces is self-ligating braces, which doesn’t need the elastic ties. Rather the wire is seen moving the bracket. Time is required for this kind of braces and you experience less amount of pain in your teeth and fewer amounts of adjustments needed than the traditional braces.

2) Ceramic Braces

Ceramic braces are of the same shape and size unlike the metal braces, except the fact that these have tooth colored or clear brackets, which blend perfectly in your teeth. Some even are seen using the tooth colored wires making it less noticeable. It has both its pros and cons, as far as the former is concerned; it is less noticeable as compared to the metal braces and is seen moving the teeth much faster than the clear plastic aligners. And if you talk about the cons, these are expensive as compared to the metal braces, and it can stain easily if the patients don’t take care of the same.

3) Clear and Removable Braces

Clear braces act as a cosmetic option to traditional metal braces that blends in more with the natural color of teeth of having hidden appearance. Generally, these brackets are made up of ceramic/plastic materials and function in a same fashion as compared to the traditional metal brackets. The clear elastic ties and white metal ties are often available to be employed with clear braces in order to help the appliances that are less conspicuous. Alternately, the clear braces can be self ligating, which means the wire clips found over the brackets without requirement for ligatures. The clear braces are known to have higher element of friction and often tend to be more brittle as compared to the metal braces. This can help in removing the appliances at the end of the treatment more difficult and time consuming.

4) Damon Braces

These types of braces are self-ligating, which are fitted in the same fashion unlike the traditional metal braces. However, instead of having brackets, which adjust and tighten the braces too often, the damon braces are seen using slide mechanism, which attaches the wires to the brackets in order to move naturally with the teeth as these are seen realigning.

5) Palatal Expanders

It is also called as a rapid palatal expander, palate expander or hyrax, is often used to widen the upper jaw of a person thus helping the upper and bottom teeth fitting together and better. This is one of the most common kinds of orthodontic procedures found in dental circles, however, the effects of the same are slightly more uncomfortable. At the same time, it would depend upon the kind of correction and age of the patient, which may result in the surgical separation of the maxilla. Using the palatal expander is among the most common ones followed by braces in order to straighten out the teeth and room has been created.

6) Forsus Appliances

This is among the modern day tools of orthodontists that are seen in the dental world, which is made up stuffs like headgear. Nowadays, this can be called as the major shift in the way the overbites have been treating the past so many years. When the upper teeth or jaw are either too far forward or more commonly the lower jaw that is too back the people often go for this treatment option in order to fix the mismatch using these tools called Forsus springs.

Conclusion

The first impression one can make is by his or her smile. However, with improper teeth one cannot give a good impression for obvious reasons. The dental braces help in fixing the irregularities found in one’s teeth.

You can check out for more info here:

http://www.indianhealthguru.com/dental-surgery-India-low-cost-benefits.html

Leave a Reply

Your email address will not be published.